Baby Monitor Shelf Mount for Hello Baby Corner Camera Shelf Compatible with Infant Optics DXR-8 DXR-5 Arlo Baby Babysense 7 Motorola – Universal Wall Mounts Crib Cam Holder for Infants Video
$14.99
Related Products
Product description
Sully Products provides specialized accessories for products such as Texas Instruments, Arlo, Reolink, Blink, Nest & Ring. You can count on us for factory direct value and highest quality.
Factory Direct ValueIt’s amazing how much you can save if the products are direct from the factory. We offer factory direct value. You will always get a deal if you purchase from Sully Products Highest Quality Products Our products are made from the highest quality plastics and silicone. Each piece of the product is vetted by hand from our quality control process
Compatible for Almost All the Baby Monitor in the Market
With the 1/4″ screw mount on the Sully baby mount, you can install any camera or monitor with it. If your monitor doesn’t have the screw hole, no worries, you can still install your baby monitor with the key shaped hole at the base of the monitor.
NO More Messiness
We help you take care of the mess. There are 3 hinges underneath the mount. You can tie your cable around the hinges in order to shorten the length of the cable.
Install with Ease in Multiple ways
For more security, you can choose to install the mount by screwing onto the wall. Alternatively, you can use the 3M tight stickers to stick on it.
[SUITABLE FOR MOST BABY CAMERAS] This baby monitor mount camera shelf can mount most infants cameras in the market, including Infant Optics DXR-8 DXR 5, Arlo Baby, Babysense, Hello Baby Monitor mount, Motorola MBP36, Summer Infant
[PUT YOUR BABY CAM AT BEST POSITION] The wall mount for baby monitor can place the video camera at the best position. No matter on the wall’s corner or Curb’s side, this baby camera holder can be installed on the surfaces securely.
[MULTIPLE INSTALLATION METHODS] The baby monitor stand mount includes super tight stickers & screws, which can firmly install the Infant Optics Camera Mount in multiple methods. Install your Baby Cam anyhow with ease!
[CABLE CONCEALMENT] This baby monitor stand is designed with hinges at the buttom, which shortens the cable length and conceal the cable perfectly from sight. This Arlo Baby wall mount facilitates better cable management and prevent infants from reaching to the cables.
[FIRMLY SECURE YOUR CAM] The baby monitor wall mount has a 3 1/3’inch screw that fits your video camera, which prevent the cam from slipping off. This corner camera mount provides strong and secure support for your infant monitor camera. It is recommended to use the screws instead of stickers, for walls that are uneven.
13 reviews for Baby Monitor Shelf Mount for Hello Baby Corner Camera Shelf Compatible with Infant Optics DXR-8 DXR-5 Arlo Baby Babysense 7 Motorola – Universal Wall Mounts Crib Cam Holder for Infants Video
Add a review
$14.99
Ly –
Does the job easy to install! Don’t use the double sided tape
Use the hardware or command strips! Pls don’t use the stickers I’ve seen a couple reviews where camera fell off the wall broke or fell on a baby! It does have a gap like everyone says but it’s also supposed to tilt down quite a bit don’t let that scare you it works for what it’s intended sturdy (with the screws) for the price I do think it was worth it. The photo above is the camera set up on the mount.
J. Leaver –
Convenient to use and comes with everything you need.
This works pretty well and comes with all you need to get it installed (aside from the tools you may need, depending on how you use it. It’s very sturdy once installed and allows the cords to easy pass through. The product is exactly like the image portrays. It definitely is an upgrade to the hap-hazard shelf I had it on before. I like the white look too, blends in well with similar colored walls.
Kirstin –
Good
Easy to mount to wall and fit the room perfectly
Tara –
Blind spot when paired with infant optics monitor
It works just fine if you have the right camera and secure it properly (must use nails, adhesive provided doesn’t hold)—but it isn’t going to work for me. Since it is advertised to be compatible with my camera, I had to lower the number of stars. I have an infant optics camera which is intended to be mounted from the bottom of the camera unit. With this mount, unfortunately it is not angled enough for my camera to be able to see my child’s entire crib, which is positioned in the same corner as the mounted camera. I can see the rest of the room well, just not the bottom half of my baby’s crib. So basically, understand that depending on the camera you have, you may end up with a huge Blind Spot underneath where you mount the camera when using this mount. The incline on the mount is not very steep.
Maggie –
Its not a right angle
This for me was a waste of money. It’s not a right angle and was hard to fit into the corner of the room. It comes with sticky pads and screws to mount and bot left it wobbly. We ended up tossing it and finding a better product. It’s a shame because it was a nice sturdy plastic but the design was definitely lacking and I didnt trust mounting it above my kids crib.
S. McGrath –
Is it suppose to tip like that?
After reading some other reviews, I’ll say1. No it didn’t come with instructions but if you even have a quarter of common sense you can figure it out.2. There is one extremely livid mother who had her mount fall off the wall and hit her baby in the head. I would be livid too BUT after looking at the pictures she posted, it looks like she only used the sticky strips and not the screws. Which was a big mistake. The sticky strips it comes with are useless. Maybe use command strips if you don’t wanna use the screws.My own personal complaints, the mount didn’t fit in the corner of my baby’s room. One side would lay flush with the wall and the other side had a gap. So that was annoying, but workable. But it tips down, and looks like it’s going to fall off the wall even though I know it won’t since I DID use the screws (cause I’ll take holes in the walls over it falling on my baby’s head ). Is it suppose to tip like that? Is that part of the design so there’s a better angle for viewing the crib? Idk. But in the end it does what it’s suppose to do.
Hjkac13 –
Works great for Summer Baby Pixel Zoom HD
This worked perfectly to hang our Summer Baby Pixel Zoom HD camera! We looked everywhere for a way to mount our camera in the corner of the room. After trying multiple others this one worked the best for us. We choose to drill it into the wall so I cant speak on how sturdy it is with just the included 3M tape. This shelf allows us to see the whole room which will be nice once our little one is older.
Elise –
absolutely necessary for the camera
so after months of having this product my husband finally installed it yesterday and WOW !! what a difference that makes being able to see the baby at the perfect angle and from all angles! i was lazy and placed the baby camera on top of her dresser for a few months but i wasnt able to see my baby throughout the whole crib sitting on a flat surface. this adapter is angled facing down a little so you can get the best view inside the crib of the baby ! i would highly reccomend this to anyone who has bought the camera !
genady –
Great camera mount. Comes with nice cable anchor points, and all sorts of mounting options. Included there is double sided adhesive or screws for more permanent mounting. Do note, if mounting permanently, one must screw into wall before attaching camera. 1/4 inch screw is fixed and does not rotate. Installation can be tool-less if using adhesive strips.
P. Sedach –
This corner shelf is sturdy, well made and flexible enough to fit into most corners. It could be a bit cheaper given the material is plastic – maybe they could make a 2 or 3 pack for 30$. But as is, worth it.
J. Wong –
It’s very affordable but the quality is also great. All the holes were drilled in properly so there was no issue with installing the mount. I recommend this because it is good value for the price.
RM –
Works well.
Stephanie T –
Fell off the wall the first time we tried it with double sided tape.Was advertised to mount infant optics camera but it does not?Discounted given high price